Thumbnails with Descriptions

 
Thumb and Description for Image 1:
Captain's side. Just the plastic pipes. Nothing inside yet.
 
Thumb and Description for Image 2:
F/O's side. Mostly completed, with mockup yoke mounted. All thats missing are the cables that will link both yokes.
And of course the final yokes.
 
Thumb and Description for Image 3:
same
 
Thumb and Description for Image 4:
The control columns can already move forward and back. They are not linked yet, though.
 
Thumb and Description for Image 5:
The mockup yoke removed.
 
Thumb and Description for Image 6:
ditto. The yoke axis is visible here. Its a M10 threaded rod.
 
Thumb and Description for Image 7:
another angle
 
Thumb and Description for Image 8:
closeup
 
Thumb and Description for Image 9:
yet another angle
 
Thumb and Description for Image 10:
The hole for the control column. The pipes (75mm diameter water pipe) are mounted on a M12 threaded rod.
The pivot point is right underneath the baseboard.
Unlike our old design, the M12 rod does not go from Captain to F/O. They are two seperate pieces.
The linkage will be done another way.
 
Thumb and Description for Image 11:
behind the control column you can see the rudder pedal housing. The upper part serves as a keyboard holder :-)
 
Thumb and Description for Image 12:
Keyboard holder closeup.
Generated by mkwebgallery.sh version 0.1.5