Gallery Descriptions-Only Page

 
Description for Image 1:
These pictures were taken during my testing/programming runs of the PIC HomeCockpit Controller (PHCC) motherboard.
Currently there's only the PIC and the MAX232 with their minimum external support actually on the board.
I've gotten my bootloader working so I can now program the PIC without having to remove it from the board. Just connect the serial cable and download the new program.
Currently you can see the green LED is on (actually flashing) because I downloaded a LED blink test program into the PIC using the bootloader.
 
 
Description for Image 2:
from another angle.
The I2C cable can be seen here.
 
 
Description for Image 3:
The grey/green/grey cable is currently hooked into the Primary Analog Channel #1
 
 
Description for Image 4:
From the top.
The red LED is the Power LED.
 
 
Description for Image 5:
Same picture, but with annotations.
 
Generated by mkwebgallery.sh version 0.1.5