| Description for Image 1: A few shots of the AP-Disengage Bar with switches installed: Its built from 3 rocker switches (permanent action), a piece of PCB material where the switches get mouted on, and the Disengage Bar made with a Hot Glue Gun (see prev. galleries). | |
| Description for Image 2: Here shown where it will be installed | |
| Description for Image 3: From the back side | |
| Description for Image 4: from the top | |
| Description for Image 5: The bar in normal position (all 3 autopilots on)... | |
| Description for Image 6: and in off position (pysically disconnects all three autopilots on a real plane. The holes in the bar where the switches get stuck into are drilled with a slight angle. This was to make the bar horizontal (when installed, would be vertical in this picture) in AP on while the rocker switches move from maybe +20 degrees to -20 degrees. | |
Generated by mkwebgallery.sh version 0.1.5 | |