Thumbnails with Descriptions

 
Thumb and Description for Image 1:
This gallery shows how the captains yoke as seen in previous galleries has been modified for non-linked standalone operation.
In this picture you can see the yoke and some parts in front of it that will be used.
 
Thumb and Description for Image 2:
To the left, a switch that I'll use for the PTT switch on the back of the yoke.
To the right, two rocker switches I'm gonna use for stab trim.
 
Thumb and Description for Image 3:
 
Thumb and Description for Image 4:
And an el-cheapo clipboard.
 
Thumb and Description for Image 5:
 
Thumb and Description for Image 6:
the yoke upside-down, you can see the yellow gear wheels inside the pipe
 
Thumb and Description for Image 7:
barely visible, the pot mounted to the metal piece.
 
Thumb and Description for Image 8:
the two gear wheels, the smaller one (nearer to the camera) is on the pot axis, the other bigger one sits on the M10 threaded rod together with the yoke.
 
Thumb and Description for Image 9:
here the pot visible at last.
 
Thumb and Description for Image 10:
 
Thumb and Description for Image 11:
closer and closer
 
Thumb and Description for Image 12:
now mounted to the control column pipe. It is now shortened right below the axis.
It will be mounted to the same board as the non-linked rudder pedals (see respective gallery)
 
Thumb and Description for Image 13:
the M12 axis
 
Thumb and Description for Image 14:
 
Thumb and Description for Image 15:
 
Thumb and Description for Image 16:
Generated by mkwebgallery.sh version 0.1.5