| Description for Image 1: This gallery shows how the captains yoke as seen in previous galleries has been modified for non-linked standalone operation. In this picture you can see the yoke and some parts in front of it that will be used. | |
| Description for Image 2: To the left, a switch that I'll use for the PTT switch on the back of the yoke. To the right, two rocker switches I'm gonna use for stab trim. | |
| Description for Image 3: | |
| Description for Image 4: And an el-cheapo clipboard. | |
| Description for Image 5: | |
| Description for Image 6: the yoke upside-down, you can see the yellow gear wheels inside the pipe | |
| Description for Image 7: barely visible, the pot mounted to the metal piece. | |
| Description for Image 8: the two gear wheels, the smaller one (nearer to the camera) is on the pot axis, the other bigger one sits on the M10 threaded rod together with the yoke. | |
| Description for Image 9: here the pot visible at last. | |
| Description for Image 10: | |
| Description for Image 11: closer and closer | |
| Description for Image 12: now mounted to the control column pipe. It is now shortened right below the axis. It will be mounted to the same board as the non-linked rudder pedals (see respective gallery) | |
| Description for Image 13: the M12 axis | |
| Description for Image 14: | |
| Description for Image 15: | |
| Description for Image 16: | |
Generated by mkwebgallery.sh version 0.1.5 | |