Description:
The board has over 400 holes, so this took a while, but is definately worth the effort. We did not break a single drill, even though we used 0.6mm and 0.8mm for most holes.
| previous | gallery thumbnail index | next |
| Viewing picture 29 of 37 (file: PHCCmotherboard_drill1.jpg) |
|
|
Description: |
|
After drilling the PCB using our homebuilt XYZ table (not under computer control, but rather using four eyes and four hands) The board has over 400 holes, so this took a while, but is definately worth the effort. We did not break a single drill, even though we used 0.6mm and 0.8mm for most holes. |
| previous | gallery thumbnail index | next |